Circuit challenges
1. A simple series circuit
British Energy logo

What you need to do
In this challenge you need to make a circuit with a cell, a lamp and a switch so that the lamp comes on when you close the switch.
This is like a torch circuit.
   Using the circuit builder
  1. Click on a number in the the cell button - this is how many cells will be in your battery
  2. Click on the lamp and switch buttons to put them onto the work area (if you use more than one lamp, before you click for a second one).
  3. Click on the wire button; your cursor will look like a little wire. Click on a connector (e.g. on the cells) and drag to another connector. You should get a wire joining the two together.
  4. Remove a component by dragging it off the work area.