| ||What you need to do|
| ||Build each of these circuits.|
a) A circuit with two cells and a lamp.
b) A circuit with two cells and two lamps with the same brightness as the lamp in a).
c) A circuit with four cells and two lamps with the same brightness as in a).
d) Try setting yourself some challenges.
| || |
| || Using the circuit builder|
- Click on a number in the the cell button - this is how many cells will be in your battery
- Click on the lamp and switch buttons to put them onto the work area (if you use more than one lamp, before you click for a second one).
- Click on the wire button; your cursor will look like a little wire. Click on a connector (e.g. on the cells) and drag to another connector. You should get a wire joining the two together.
- Remove a component by dragging it off the work area.